Dataman 48UXP Manual de usuario descargar pdf (Pagina 44)

Figure 4-5 Device verification screen

Memory Protect/program configuration

Menu Device / Memory Protect

Hot key ALT-U (PLD only)

This function is a device-specific command; it appears on the main

menu only after chips been selected have this capability.

For example GAL, CEPAL, Microprocessor, and some Flash

memory, the function must be configured before use. When properly

edit the configuration byte by enable the configuration (ALT-G), set

the desired value and status in the buffer then perform this

command will program the configuration data of chips, most user

will program the main memory first then program the configuration

(two step). However in Mass production mode, user can enable the

memory protect /program configuration in the device operation

menu, after the main memory buffer has been loaded and

configuration byte data has set to desired value, perform program

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 71 72

Sin comentarios

Dataman 48UXP Manual de usuario Pagina 44